Home HDS
  Solutions
Products
Support
News
About Us
Contact   HDS
 
 
×

Setup & Surveying
Various station setup methods -
Set Orientation, Known Backsight,
Multiple Backsights, Resection,
Helmert Resection, Local
Resection, Height Transfer.

×

Height Transfer
Transfers the height of a
point with known height
to the instrument to
determine the station height.

×
×
×

Backsight Check
Check if the station position
is still correct by remeasuring
control points with graphical
navigation from total station.

×

Offset
Calculation of target point
coordinates if it is not
possible to set up the
reflector, or to aim at the
target point directly.

×

Hidden Point
Measuring points which
are not directly visible,
using a special hidden
point rod.

×

Tie Distance
Calculation of slope distance,
horizontal distance, height
difference, grade and bearing
between two target points.

×

Reference Grid
Enables to stake out a grid
referring to a reference line
by entering the line and
offset values.

×

Reference Plane
Defining planes and
measuring points relative
to the plane. Staking the
calculated intersection
point with graphical
navigation from total
station.

×

Reference Arc
Defining arcs and checking
points relative to the arc
with graphical view. Staking
points, arcs, chords and
angles with graphical
navigation.

×

Traverse
Measure, compute and
adjust traverses including
survey observations.

×

COGO
Various methods for calculation
of coordinate geometry with
graphical view of computed
results – Inverse, Traverse
(distance &  bearing),
Intersections, Set Point,
Offset Plane, Line Extension.

×

Remote Height
Calculation of the position
of an inaccessable point
by measuring to a base
point and then aiming at
the remote point.

×

Stake Out
Staking of points with
graphical navigation
from total station.

×

Road 3 D
Upload or manual creation
of horizontal and vertical
alignments. Checking and
staking points and slopes
relative to the alignments.

×

Road 2 D
Defining straights, curves,
spirals and checking points
relative to the defined
element with graphical
view. Staking points with
graphical navigation from
total station.

×

Survey
Measuring an unlimited
number of points including
Coding and QuickCoding
with up to 8 attributes.
Codes can be selected
from predefined list, or
manually entered.

Setup & Surveying

Height Transfer

Area & Volume Calculation

Reference Line

Backsight Check

Offset

Hidden Point

Tie Distance

Reference Grid

Reference Plane

Reference Arc

Traverse

COGO

Remote Height

Stake Out

Road 3 D

Road 2 D

Survey


  Leica FlexField plus & Leica FlexOffice Brochure

Brazilian
English
English US
French
German
Italian
Polish
Portuguese
Spanish
Swedish